Care And Maintenance - Senville SENL/12HD/MI Manuel D'utilisation

CARE AND MAINTENANCE

Care and maintenance
Filter Handle
Cleaning the Grille, Case and Remote Controller
Turn the system off before cleaning. To clean, wipe
with a soft, dry cloth. Do not use bleach or abrasives.
NOTE: Supply power must be disconnectd before
cleaning the indoor unit.
CAUTIONS
A cloth dampened with cold water may be used on
the indoor unit if it is very dirty. Then wipe it with a
dry cloth.
Do not use a chemically treated cloth or duster to
clean the unit.
Do not use benzine, thinner, polishing powder, or
similar solvents for cleaning. These may cause
the plastic surface to crack or deform.
Never use water hotter than 40 C to clean the front
panel, it could cause deformation of discoloration.
WALL-MOUNTED TYPE
Cleaning the air filter
A clogged air filter reduces the cooling efficiency of
this unit. Please clean the filter once every 2 weeks.
1. Lift the indoor unit panel up to an angle until it
stops with a clicking sound.
2. Take hold of the handle of the air filter and lift it
up slightly to take it out from the filter holder,
then pull it downwards.
3. Remove the Active Carbon & Dust Filter from the
indoor unit.
Clean the it once two weeks.
Clean the it with a vacuum cleaner or water,
then dry it up in cool place.
4 1