Technical Information - Zanussi ZRB24100WA Notice D'utilisation

Technical information

For further technical information please refer to the rating on the internal left side
of the appliance and in the energy label.
Dimensions
Height
Width
Depth
Rising time
Installation
Read the Safety information carefully for
your safety and correct operation of the
appliance before installing the appli-
ance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate class Ambient temperature
SN +10ºC to +32ºC
N +16ºC to +32ºC
ST +16ºC to +38ºC
T +16ºC to +43ºC
Location
The appliance should be installed well away
from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air
can circulate freely around the back of the
cabinet. To ensure best performance, if the
appliance is positioned below an overhanging
wall unit, the minimum distance between the
top of the cabinet and the wall unit must be at
least 100 mm. ldeally, however, the appliance
should not be positioned below overhanging
wall units. Accurate leveling is ensured by
one or more adjustable feet at the base of the
cabinet.
34
ZANUSSI_ZRB24100WA-ZRB24100XA_CS-HU.indd 34
All manuals and user guides at all-guides.com
mm
mm
mm
Hours
Electrical connection
• Before plugging in, ensure that the voltage
• The appliance must be earthed. The power
• The manufacturer declines all responsibil-
• This appliance complies with the E.E.C.
Levelling
The appliance should be level in order to
eliminate vibration. To make the appliance
level, it should be upright and both adjusters
should be firmly contacted with the floor. You
can also adjust the level by screwing out the
appropriate level adjuster at the front (use
your fingers or a suitable spanner).
1687
558
613
10
Warning! It must be possible to discon-
nect the appliance from the mains power
supply; the plug must therefore be easily
accessible after installation.
and frequency shown on the rating plate cor-
respond to your domestic power supply.
supply cable plug is provided with a contact
for this purpose. If the domestic power
supply socket is not earthed, connect the
appliance to a separate earth in compliance
with current regulations, consulting a quali-
fied electrician.
ity if the above safety precautions are not
observed.
Directives.
www.zanussi.com
2016-02-16 11:00:40