Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables
Connecting to Y, P
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
2
Connecting a Camcorder
Camcorder
, P
B
R
TV Rear Panel
Audio Cable (Not supplied)
Component Cable (Not supplied)
S-Video Cable(Not supplied)
or
Video Cable (Not supplied)
Audio Cable (Not supplied)
2
TV Side Panel
English - 4
1
Connect Component Cables
between the COMPONENT IN (1 or
2) [Y, P
, P
] jacks on the TV and
B
R
the COMPONENT [Y, P
on the DVD Player or Cable Box /
Satellite receiver(Set-Top Box).
2
Connect Audio Cables between
the COMPONENT IN (1 or 2) [R-
AUDIO-L] jacks on the TV and the
AUDIO OUT jacks on the DVD
Player or Cable Box / Satellite
receiver (Set-Top Box).
3
Press the SOURCE button on the
remote control until you see the
DVD Player or Cable Box/Satellite
receiver (Set- Top Box) signal (see
"To Select the Source" on page 10)
➢
Component video separates the video
into Y (Luminance (brightness)), P
(Blue) and P
(Red) for enhanced
R
video quality. Be sure to match
the component video and audio
connections. For example, if
connecting the video cable to
COMPONENT IN 1, connect the audio
cable to COMPONENT IN 1 also.
➢
Each DVD Player or Cable Box /
Satellite receiver (Set-Top Box) has a
different back panel configuration.
➢
When connecting a DVD Player or
Cable Box / Satellite receiver (Set-
Top Box), match the color of the
connection terminal to the cable.
1
Connect a Video Cable
(or S-Video Cable) between the AV
IN 2 [VIDEO] (or S-VIDEO) jack on
the TV and the VIDEO OUT jack on
the Camcorder.
2
Connect Audio Cables between the
AV IN 2 [L-AUDIO-R] jacks on the
TV and the AUDIO OUT jacks on
the Camcorder.
3
Press the SOURCE button on the
remote control until you see the
Camcorder signal (see "To Select the
Source" on page 10)
➢
Each Camcorder has a different back
panel configuration.
➢
When connecting a Camcorder, match
the color of the connection terminal to
the cable.
, P
] jacks
B
R
B