Product Overview; Sensitivity Setting - Smanos VD8000 Guide Rapide

EN
Introduction
The wireless vibration detector adopts the theory of vibration,
touch and motion mode. Once it detects any vibration, it will
automatically send wireless signal to the control panel for alarm. It
is widely used for objects with a solid or thick structure, like safe and
so on. Its vibrating sensitivity can be adjusted in three levels thus
it can prevent false alarm effectively. Two pieces of AAA 1.5V LR03
batteries are included in the detector, which enables 12 months
standby.

Product Overview

LED indicator
All manuals and user guides at all-guides.com
LED Indication
Flash once: Vibration detected, sending wireless signal to the control
panel.
Flash once every 2 seconds: Low battery. Please replace the battery
immediately.
PCB Layout
Tamper switch

Sensitivity Setting

Take off the back case with screwdriver, and put the black jumper
cap onto the jumper of required sensitivity level.
Antenna
Sensitivity setting
Mode setting
EN