Extent Of The Delivery; Technical Data; Functional Description - Parkside PSS 270 C3 Traduction Des Instructions D'origine

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Orbital sander
- Dust collection box
- Adapter for external dust extraction
- Sanding sheet, grit size 120
- Instruction Manual
Overview
1 Grip surface
2 On/off switch
3 Handle
4 Dust collection box
5 Clamp
6 Clamping lever
7 Sanding plate
8 Oscillation rate selector
9 Sanding sheet
10 Adapter for external vacuuming
11 Filter insert
12 Connection for dust extraction
13 Connection groove

Functional description

The oscillating sander has an oscillating
sanding plate for processing wood, metal
or paint.
Please refer to the descriptions below for
information on how the operating elements
work.

Technical data

Orbital sander ..............PSS 270 C3
Nominal voltage U ............ 230V~; 50 Hz
Power input P ..............................270 W
Idle speed n ................7000-12000 min
Idle oscillation rate n
Weight ............................approx. 1.7 kg
Sanding sheet size ..............92 x 182 mm
Sanding disc .......................... ø 125 mm
Protection class .................................II
Protection type ................................. IPX0
Sound power level
(L ) ................... 80.9 dB(A), K
pA
Sound power level
(L ) .................. 91.9 dB(A); K
WA
Vibration (a ) ........ 10.4 m/s
h
The specified total vibration values and the
stated noise emission values have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The specified total vibration values and the
stated specified noise emission values can
also be used for a provisional assessment
of the load.
Warning: The vibration and noise
emissions may deviate from the
specified values during actual use
of the power tool, depending on
how the power tool is being used
and, in particular, what kind of ma-
terial is being worked on.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
GB IE
14000 - 24000 min
0
= 3 dB
pA
= 3dB
WA
; = 1.5 m/s
2
-1
-1
2
17