ASROCK P4VM900-SATA2 Mode D'emploi page 22

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

All manuals and user guides at all-guides.com
bottom to load the VIA
®
our Support CD:
.. \ I386
After that, please insert Windows
continue the installation.
1. If you install Windows
convert, delete or rebuild) RAID functions on SATA / SATAII HDDs, please set
the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
2. If you want to use "VIA RAID Tool" in Windows
SATA / SATAII drivers from the Support CD again so that "VIA RAID Tool" will be
installed to your system as well.
3. To operate SATA RAID utility under Windows
V-Raid Utility" icon on the desktop and select "Run as administrator" item to
execute.
2.13
2.13
2.13
2.13 Installing Windows
2.13
Installing Windows
Installing Windows
Installing Windows
Installing Windows
Functions
Functions
Functions
Functions
Functions
If you want to install Windows
without RAID functions, please follow below steps.
STEP 1: Set up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [non-RAID].
STEP 2: Install Windows
After setting up BIOS, you can start to install Windows
your system.
2.14
2.14
2.14 Untied Overclocking T
2.14
2.14
Untied Overclocking Technology
Untied Overclocking T
Untied Overclocking T
Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE bus. You may set "CPU
Host Frequency" option of BIOS setup to [Auto], which will show you the actual CPU
host frequency in the following item. Therefore, CPU FSB is untied during overclocking,
but PCI / PCIE bus is in the fixed mode so that FSB can operate under a more stable
overclocking environment.
Please refer to the warning on page 6 for the possible overclocking risk before
you apply Untied Overclocking Technology.
2 2
2 2
2 2
2 2
2 2
ASRock P4VM900-SATA2 Motherboard
RAID drivers. VIA
®
RAID drivers are in the following path in
®
TM
Vista
optical disk into the optical drive again to
®
Vista
TM
on IDE HDDs and want to manage (create,
®
environment, please install
®
Vista
2000 / XP / Vista
2000 / XP / Vista
2000 / XP / Vista
2000 / XP / Vista
2000 / XP / Vista
®
®
2000 / XP / Vista
TM
OS on your SATA / SATAII HDDs
Advanced screen
®
TM
2000 / XP / Vista
OS on your system.
®
echnology
echnology
echnology
echnology
TM
, please right-click "VIA
Without RAID
Without RAID
Without RAID
Without RAID
Without RAID
TM
TM
TM
TM
TM
IDE Configuration.
2000 / XP / Vista
TM
on

Publicité

Table des Matières
loading

Table des Matières