Important Safety Information - Greenlee G2090 Manuel D'instructions

IMPORTANT SAFETY INFORMATION

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for pre-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning could
result in severe injury or death.
Greenlee Tools, Inc.
SAFETY
ALERT
SYMBOL
This tool is not protected against
electrical shock. Read and under-
stand instructions before using the
Greenlee G2090/03560.
Failure to observe this warning could
result in severe injury or death.
Wear eye protection when using this
tool.
Failure to wear eye protection could
result in serious eye injury from flying
debris.
Blades are sharp. Keep fingers away
from blades when stripping cable and
when replacing blade.
Failure to observe this precaution
may result in injury.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
G2090/03560