Names Of Parts; Cleaning And Sterilising - NUK e-Motion Mode D'emploi

age as there is a danger that small parts
may become detached and swallowed.
• Do not leave teats in cold sterilising solu-
tion beyond the period specified by the
manufacturer, as this may cause damage to
the material.
1 Valve
2 Breast shield
3 Connection ring
4 Lip valve (+ 1 Replacement lip valve)
5 Breast milk container
6 Stand for breast milk container
7 Sealing disc
8 Protective cap
9 Screw ring
10 Teat
Hygiene is of priority when handling
breast milk and all parts that come
into contact with it. The pump should
therefore only be used in a clean and
sterile condition.
5.1 Recommended cleaning times
After each use:
• All except for the motor unit
accessories
and adapter
12 18
cleaned with water and sterilised
immediately after each use.
5.2 Cleaning Œ
(Figure
Caution! Unplug the mains adapter
wall socket before cleaning.
Clean the lip valve
Caution!
and pointed bristles as well as sharp objects may
damage the valve.
1. Unscrew the motor unit
the connection ring
3
All manuals and user guides at all-guides.com

4. Names of Parts

5. Cleaning and Sterilising

must be thoroughly
in reverse order)
18 from the
carefully. Hard
4
12 together with
from the bottle .
5
20
• For hygiene and safety reasons, teats should
be replaced every 1-2 months.
• Use teats only with NUK FIRST CHOICE
Bottles. The NUK Vented Teat and NUK
Breast Milk Container
EN 14350.

(Figure )
11 Power supply plug
12 Motor unit
13 Warning light when the voltage is too low
(batteries need changing)
14 On/off button
15 Battery compartment catch lock
16 Battery compartment lid
17 Suction power regulator
18 Mains adapter
19 Interchangeable plug attachments
2. Remove the lip valve
of the breast shield.
3. Unscrew the connection ring
motor unit .
12
4. Pull the motor unit
shield 2 .
5. Remove the valve 1 from the breast shield
6. All accessories -
1 10
, the parts ,
12 11 18
cleaned and rinsed under running water as
milk residues may result in the build up of
bacteria and may damage the material. If nec-
essary use mild detergent.
7. Wipe the motor unit
Caution: Never immerse the motor unit or
adapter in water as this could damage the
electrics.
comply with
4 from the lower part
from the
3
off the breast
12
2 .
(not the motor unit
and ) should be
19
with a damp cloth.
12