Warranty - Sunrise Medical Zippie RS Manuel D'utilisation

Masquer les pouces Voir aussi pour Zippie RS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.0 Warranty

Guarantee
THIS IN NO WAY AFFECTS YOUR STATUTORY RIGHTS.
Warranty conditions
1) The repair or replacement must be carried out by an
authorised Sunrise Medical dealer/service agent.
2) To apply the warranty conditions, should your produce
require attention under these arrangements, notify the
designated Sunrise Medical service agent immediately giving
full information about the nature of the difficulty. Should you be
operating the product away from the locality of the designated
Sunrise Medical service agent work under the "Warranty
Conditions" will be carried out by any other service agent
designated by the manufacturer.
3) Should any part of the wheelchair require repair or
replacement, as a result of a specific manufacturing or material
defect, within 24 months, (5 years on frame and cross-brace),
from the date on which the possession of the product was
transferred to the original purchaser, and subject to it remaining
within that ownership, the part or parts will be repaired or
replaced completely free of charge if returned to the authorised
service agent.
NOTE: This guarantee is not transferable.
4) Any repaired or replaced part will benefit from these
arrangements for the balance of the warranty period applicable
to the wheelchair.
5) Parts replaced after the original warranty has expired are
covered for a further 12 months.
6) Items of a consumable nature will not generally be covered
during the normal warranty period, unless such items have
clearly suffered undue wear as a direct result of an original
manufacturing defect. These items include amongst others
upholstery, tyres, inner tubes, and similar parts.
7) The above warranty conditions apply to all product parts for
models purchased at full retail price.
8) Under normal circumstances, no responsibility will be
accepted where the product has required repair or replacement
as a direct result of:
a) The product or part not having been maintained or serviced
in accordance with the manufacturer's recommendations, as
stated in the Owner`s Manual and / or Service Manual. Failing
to use only the specified original equipment parts.
b) The product or part having been damaged by neglect,
accident or improper use.
c) The product or part having been altered from the
manufacturer's specifications, or repairs having been attempted
prior to the service agent being notified.
d) If the product has corrosion due to incorrect maintenance
Zippie RS Rev.1.0
28

Publicité

Table des Matières
loading

Table des Matières