Safety Instructions; General Information - BASETech HS-9301SV Notice D'emploi

7. Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do
not follow the safety instructions and information on proper handling in this manual, we assume
no liability for any resulting personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material
for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
• Never use the product immediately after it has been brought from a cold room into a warm one. The
condensation generated could destroy the product. Allow the product to reach room temperature before
connecting it to the power supply and putting it to use. This may take several hours.
• Never use the blender outdoors.
• Under no circumstances should you service any of the components in the interior of the blender,
therefore never disassemble the motor unit.
• Consult an expert when in doubt about the operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified
shop.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
16
All manuals and user guides at all-guides.com