Operation; Switching On And Off; Maintenance - Haussmann PT110626 Guide De L'utilisateur

All manuals and user guides at all-guides.com

OPERATION

WARNING ! Always use the correct voltage. The voltage of the power
!
source must match with the values on the nameplate of the power tool.

Switching On and Off

To start the power tool, push the ON/Off switch (2).
To lock the ON/Off switch, keep it pressed and additionally push the lock-on
button (1).
To switch off the power tool, release the On/Off switch (2). When the On/Off
switch (1) is locked, press it first and then release the On/Off switch (2).
WARNING ! Wait until the power tool has come to a complete stop
!
before placing it down.
Sanding Surfaces
Switch the power tool on, place it with the complete sanding surface on the
surface to be worked and move the power tool with moderate pressure over the
workpiece.
The removal capacity and the sanding pattern are mainly determined by the
selection of the sanding sheet, and the applied pressure.
Only flawless sanding sheets achieve good sanding capacity and extend the
service life of the power tool.
Pay attention to apply uniform sanding pressure; Intensifying the sanding pressure
does not increase the sanding performance. It causes an increase in the
wear of the tool and sanding sheet.
Intensifying the sanding pressure does not increase the sanding performance. It
causes an increase in the wear of the tool and sanding sheet.
A sanding sheet that has been used for metal should not be used for other
materials.
Use only original sanding accessories.

MAINTENANCE

WARNING ! Before performing any work on the tool itself, unplug tool from
!
power source.
For safe and proper operation, always keep the tool and ventilation slots clean.
Regularly check to see if any dust or foreign material has entered the slots near
the motor and around the on/off switch. Use a soft brush to remove any
accumulated
dust. Wear safety glasses to protect your eyes while cleaning.
If the body of the tool needs cleaning, wipe it with a soft damp cloth. A mild
detergent can be used but nothing containing alcohol, petrol or other harsh
cleaning agents.
19