iOttie Auto Sense Guide page 4

Releasing Device
3. Buttons under the light on both sides of
device can also open and close the arms. One
or both buttons can be pressed.
• The Auto Sense is powered via a Micro-USB cable
and coil cell battery. There is no on/off switch on
the device. Once it is plugged in, the device will
remain on unless the vehicle shuts off power when
in parking mode.
Qi Alignment Guide
The Qi Receiver Coil is usually located in the center area of the phone. Check
with your phone's manufacturer for Qi coil location. Below are some examples for
commonly used phones.
For larger/plus phones or larger cases, knob on mount will need to be adju-
sted as indicated by laser etching on back for proper alignment with Qi coils.
The Qi coil on the mount is located at the top, above the iOttie logo. Please
follow the guide below to line up your phone with the device for an optimal
wireless charging.
Auto Sense
Auto Sense
iPhone XR iPhone XS Max
iPhone X
Samsung Samsung Samsung
Galaxy S10 Galaxy S10+ Galaxy Note9
Wireless Charger Specifications
INPUT
CHARGING PORT
LENGTH
WIDTH
HEIGHT
WEIGHT
Car Charger Specifications
MODEL NUMBER
INPUT
OUTPUT
MICRO USB CABLE LENGTH
Charging Indicator
Solid Green Light
Blinking Red Light
DC 9.0V-1.67A
DC 5.0V-2.0A
MICRO USB
2.96"
2.75"
3.74" (Foot not extended)
4.16oz
CHY-CC-U2CQ3C
DC 12V~24V
DC 5V - 3A
DC
9V - 2A
DC
12V - 1.5A
120MM
Smartphone charging.
Smartphone not charging.
Foreign object detected or
overheating of mount or smartphone.