Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
STEP 1. ATTACH FRONT AND BACK
STABILIZER
Attach the Front Stabilizer (6) and Back
Stabilizer (2) to Main Frame (AN1) respectively
with 4pcs of Hexagon Flat Round Head Screw
(5) and Flat Washer (4) with the Hex tool for
fastening.
STEP 2. INSTALL LEFT & RIGHT PEDAL
Refer to the figure as below, insert the Left
Pedal and Right Pedal (A7) into the Crank.
Tighten them with the 15mm wrench provided
by turning clockwise.
STEP 3. FASTEN HANDLEBAR POST
Loosen the Quick Handle (A10). Then insert the
handle bar post (A8) into the handlebar support
and secure with the Quick Handle (A10).
14
Publicité
Chapitres
Table des Matières
