Installation
Television Location
This unit can be used as part of an entertainment center.
Consult your dealer for available options.
•
Avoid excessive sunlight or bright lights, including
reflections.
•
Keep away from excessive heat or moisture. Inadequate
ventilation may cause internal component failure.
•
Fluorescent
lighting
transmitting range.
•
Keep away from magnetic equipment, including motors,
fans and external speakers.
WARNING: Use this Projection Television receiver
only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over. In order to avoid injury to children, never place your
Projection Television receiver on a piece of furniture that is
capable of being tilted by a child leaning on it, pulling on it,
standing on it, or climbing on it. A falling Projection Television can
cause serious injury or even death.
PT-50DL54:
CAUTION: This Projection receiver for use only with
PANASONIC TY-50DL54K stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.
PT-50DL54X:
CAUTION: This Projection receiver for use only with
PANASONIC TY-50DL54K stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.
PT-60DL54:
CAUTION: This Projection receiver for use only with
PANASONIC TY-60DL54K stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.
Optional Cable Connections
Shielded audio and video cables should be used between
components. For best results:
•
Use 75-ohm coaxial shielded cables.
•
Use appropriate input and output connectors that match
your component connectors.
•
Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED
OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.
All manuals and user guides at all-guides.com
may
reduce
remote
control
Polarized plug
Cable / Antenna Connection
For proper reception, either a cable or antenna connection
is required.
Cable Connection
Connect the cable supplied by your local
cable company. Tighten with fingers only.
Use of any tool (e.g. pliers) for tightening
may result in tuner damage.
Note:
A cable converter box may be
required for proper reception.
Check with your local cable
company for compatibility requirements.
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna
is required. For best reception an outdoor antenna is
recommended.
•
Connect home antenna to ANT
connection on back of television.
Note:
Cable Mode is preset at the
factory.
Safety Precautions
Please take safety precautions to
prevent the unit from falling over. The unit may fall over
during earthquakes, or if someone stands on or shakes the
projection TV.
Procedure
•
Use a strong rope or a chain (not included) to fasten the
projection TV firmly to a strong support such as a wall or
pillar.
Viewing Position
To optimize your viewing comfort, please follow the viewing
guidelines shown in the diagrams below. If viewing for an
extended period of time, sit as far back from the screen as
possible.
o
70
o
70
Viewing distance for 50" models is at least
6 feet and for 60" is at least 7 feet.
Note:
If you view the Projection Television at a short distance
for a long time, your eyes may become fatigued.
I
NSTALLATION
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of PTV
Incoming Cable from
Home Antenna
o
30
o
30
5