amzchef MS-802 Manuel D'instruction page 12

power and unplug unit before troubleshooting.
Problem
Blender fails to start or
stops while it is running
and cannot be restarted.
The blender don't switch
on.
Blender doesn't turn off.
Ingredients
mixing properly.
Food is
chopped.
Hot smell emitting from
unit.
Analysis &Solutions
1. Check to see if unit is securely
plugged into an electrical outlet.
2. Make sure the container is securely
placed on the motor base.
3.The motor stops during operation due
to overheating. Allow the blender to
cool down for 20 minutes.
Make sure the blade assembly is
properly assembled to the jar and that it
is not misaligned.
Unplug the power cord from the
electrical outlet and call customer
service for support.
1. Ensure you have added enough
liquid to the ingredients. Your mixture
are not should be fluid at all times.
2. You may have exceeded the max fill
line on the jug. Do not fill past the
highest graduation marking.
Either you are chopping too much food
unevenly
at once, or not pulsing properly.
Reduce the amount of food in the jar.
The blender might have overheated,
allow to cool before reusing.
12