Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.10
Re-fit the top cover, making sure the
front is attached first. If the top cover
is not fitted correctly the unit will
not switch on
Hint: Fit the top cover making sure the
front is pushed in place first and then
push the back end with the screws
down to give a snug fit
3.11
Re-fit the two screws that hold
the lid down using a screwdriver.
Caution: The screws should be hand
tightened, do not over tighten
Insert the plug into the mains socket
3.12
Press and hold the dispense button for
10 seconds until you hear a beep as this
will rest the filter timer
Note: Place a cup or container under
the dispense area before carrying out
step
3.12
3.13
The filter now needs to be flushed,
follow step
2.3
through to
All manuals and user guides at all-guides.com
2.8
Publicité
Table des Matières
