WaterLogic F-FWEG1-M-A-NT Serie Manuel D'utilisation page 13

All manuals and user guides at all-guides.com
3.9 Fit the new filter assembly into the
appliance as follows:
1. Insert the filter assembly back into
its cradle, aligning the two male spigots
with the female holes in the cradle
2. Push firmly until the filter sits snugly
and is flush inside the cradle and with
the cradle top surface
2.
3. Lock the filter by closing the locking
lever until it 'clicks' into place
4. Rotate the red rotating lever back into
the LOCK position
1.
3.
13