Conrad GX107 Mode D'emploi page 59

To make the procedure clear - Proceed as follows:
1. Insert the SIM card intended for the "GX107" in your mobile phone.
2. Change the PIN code to 1513 according to the instructions of your mobile phone.
3. Remove the SIM card with the changed PIN code from the mobile phone again.
4. Insert the SIM card with the changed PIN code into the "GX 107".
The SIM slot is located on the front of the circuit board of the "GX 107", underneath the
casing cover.
SIM card with PIN 1513

To prevent unauthorised access to the "GX 107" and its SIM card, you should
change your PIN again after commissioning the "GX 107"! This is described in
more detail in chapter "Protecting the "GX 107" via a PIN code".
All manuals and user guides at all-guides.com
59