Table des Matières
Publicité
–
+
ELEC
STARTER MOTOR
All manuals and user guides at all-guides.com
SERVICE POINTS
Pinion gear assy. inspection
Rotate the pinion gear assy. clockwise to
check that it moves freely. Also, rotate the
pinion gear assy. counterclockwise to make
sure that it locks.
Armature inspection
8-23
1. Inspect:
Pinion gear teeth
Damage/wear → Replace.
2. Check:
Clutch movement
Incorrect → Replace.
NOTE:
1. Measure:
Commutator undercut a
Out of specification → Replace.
Commutator undercut limit:
0.8 mm (0.03 in)
2. Check:
Armature coil continuity
Out of specification → Replace.
Armature coil continuity:
Commutator
segments a
Segment -
Armature core b
Segment -
Armature shaft c
E
Continuity
No continuity
No continuity
Publicité
Table des Matières
