Operation
6.5
Devide the interior (only SC38)
You can devide the interior of the refrigerator as follows (fig. 4, page 4):
No partition grille (A): Both coolers are actively cooled or heated.
Open partition grille (B): The large cooling compartment is actively cooled
or heated. The small cooling compartment is less cooled or heated.
Closed partition grille (C): The big cooling compartment is actively cooled
or heated. The small refrigerator compartment is passively cooled or
heated.
I
NOTE
Mount the bar, even if you operate the cooling device without par-
tition grille, so that the lids can close properly.
➤ Mount the partition grille as shown (fig. 5, page 5).
6.6
USB port for power supply
The USB port (fig. 2 1, page 3) allows you to charge small devices like
mobile phones and mp3-players.
Using the USB port does not affect the cooling performance.
A
NOTICE!
Ensure that any device connected to the USB port is compatible
with 5 V/500 mA operation.
Proceed as follows (fig. 2, page 3):
➤ Connect the DC connection cable (2) or the AC connection cable (3) of
the cooling device with the power supply.
➤ SC30, SC38: Turn the cooling capacity control (6) to the "MAX" position.
➤ Connect your device to the USB port (1).
28
All manuals and user guides at all-guides.com
CoolFun SC26, SCT26, SC30, SC38
EN