Cleaning And Maintenance; Technical Data; Disposal - AEG SR 4379 CD Mode D'emploi

All manuals and user guides at all-guides.com
the desired track and then press the PROGRAM button
again. The display changes to memory slot 02.
3. Select the next track with the
the PROGRAM button again. Repeat the procedure until
all the desired tracks are selected.
NOTE:
If the storage capacity of the titles to be programmed is
reached, the programmed titles will be shown one after
the other. Afterwards the memory location 01 will flash.
4. Press the button (14). The playback starts. The display
shows the first selected title number.
NOTE:
The activated function cannot be shown in the display
for technical reasons.
5. Press once the button to stop the playback while
retaining the program.
6. To play the programme back again, press the
7. To delete the program, press the
The device stops automatically once the entire sequence
of programmed tracks is completed. The programmed
sequence will be deleted from the memory.

Cleaning and Maintenance

CAUTION:
Do not immerse the device in water.
• Always remove the mains plug before cleaning the
device.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not insert-
played back. ed or inserted
incorrectly.
Batteries too
weak.
CD jumps Check the disc
during play- for ingerprints,
back. dirt or scratches.
The unit does The unit is
not work. blocked and
"hangs".
SR4379CD_IM
In order to comply with the "ErP 2 (Energy-related Prod-
/ buttons and press
ucts)" Ecodesign Directive (2009 / 125 / EC) that aims at an
improved energy efficiency and general environmental
compatibility, the device will automatically switch to stand-
by after a certain amount of time without a signal.

Technical Data

Model: ............................................................................ SR 4379 CD
Power supply:: .................................................................230 V, 50 Hz
Battery operation: ..................................6 x 1.5 V, Type UM 2 / R 14
Power consumption:................................................................... 9 W
Protection class: ................................................................................
Net weight: .............................................................. approx. 0.94 kg
Radio section:
Frequency ranges:........................................FM 87.5 ~ 108.0 MHz
button.
button twice.
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.

Disposal

Meaning of the "Dustbin" Symbol
This helps avoid the potential effects of incorrect disposal on
Solution
the environment and human health.
Ensure that the disc is
inserted with the label This will contribute to the recycling and other forms of re-utili-
facing upwards. sation of electrical and electronic equipment.
Insert new batteries
Information concerning where the equipment can be dis-
or operate the device
posed of can be obtained from your local authority.
with the mains lead.
Check the disc for
ingerprints, dirt or
scratches.
Disconnect the mains
plug for approximately
5 seconds. Then switch
the unit back on.
NOTE: Automatic Standby switch
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
English
33
22.12.16