How To Replace The Control Knob Led (For Models With Led Light Only) - Furrion FSRE17SA-BL Consignes D'utilisation

Cleaning and Maintenance
How to replace the Control
Knob LED (for models with
LED light only)
1. Disconnect the oven from the power
supply by means of the switch
used to connect the appliance to
the electrical mains, or unplug the
appliance if the plug is accessible.
2. Pull to remove the control knob with
LED broken. (Fig. 18)
Fig. 18
3. Remove the two screws holding the
LED light using a Phillips screwdriver.
(Fig. 19)
Fig. 19
25
4. Pull to remove the socket connected
to the LED. (Fig. 20)
Fig. 20
5. Repeat steps 4 to 2 to replace the
broken LED.