Lighting Oven - Furrion FSRE17SA-BL Consignes D'utilisation

Operation

Lighting Oven

Match Lighting :
1. Before lighting, check to make sure
all the control knobs are turned to
OFF position.
2. Check that the main gas tank valve is
open.
3. Open the range door. (Fig. 13)
Fig. 13
4. Push and turn the oven control knob
counterclockwise to LITE position.
(Fig. 14)
Fig. 14
5. Continue to push and hold the
oven control knob in, then open
the oven door and place a burning
long wooden match (or the match
extension or a butane lighter with
19
extension) through the spaces in the
grate near the ports of the burner to
light the oven burner. (Fig. 15)
Fig. 15
6. Continue to push and hold the oven
control knob in for 5 seconds after
pilot is lit. Release knob and verify
pilot stays lit. Repeat steps 4 and 5 if
pilot does not stay lit.
7. Rotate the oven control knob to adjust
burner flame to desired level. The
oven pilot has been factory set and
requires no further adjustment.
(Fig. 16)
Fig. 16