Furrion FSRE17SA-BL Consignes D'utilisation page 15

Installation
4. Connect a propane supply line to
the range oven in the upper left rear
corner of the cabinet. Connect a
positive 12V power supply wire and
a 12V ground wire to the appliance
in the upper right rear corner of the
cabinet. (Fig. 4)
Fig. 4
5. Use four tapping screws on both left
and right to secure the range oven
onto the cabinet. (Fig. 5)
Fig. 5
IMPORTANT: Make sure the gas supply
pipe cannot contact any moving parts
after installation. Leave adequate space
for the gas supply pipe in case it is
bent or damaged after installation. Use
propane gas only for this appliance.
6. Check the pipe fittings for leaks using
15
a leak detection solution. Never use
a flame.
7. Align the top glass cover assembly
with the slots on the cooktop and
place it into the range oven. (Fig. 6)
Fig. 6
8. Press the backside of the top glass
cover until you hear a click noise. The
top glass cover is now locked into
place. (Fig. 7)
Fig. 7