DeWalt DW756 Guide D'utilisation page 9

Fig. J
DW756
23
24
25
Fig. K
26
24
22
25
19
8. Install the new wheel or other accessory
For the DW756 (Fig. J), be sure that the wheel flanges
24 are in place (concave side toward the wheel).
For the DW758 (Fig. K), be sure the spacers
the wheel flanges 24 are both in place (concave side
toward the wheel).
9. Hold both hex nuts 22 as before and tighten them
but do not overtighten. Overtightening can crack a
grinding wheel.
10. Replace the wheel covers and their screws.
11. Adjust the spark guard 1 to 1/16" (1.6 mm) from the
wheel and tighten securely.
12. Adjust the tool rest to 1/8" (3.18 mm) from the wheel
4
and tighten securely.
13. Adjust the eye shield to a point between your eyes
2
and the wheel. The bench grinder is now ready for use.
14. Follow the above steps to install buffing wheels and
wire wheel brushes as well as grinding wheels.
All manuals and user guides at all-guides.com
DW756
26
5/8" (16 mm) Face, 6" (152 mm)
24
dia. 60 grit medium grinding wheel
3/4" (19 mm) Face, 6" (152 mm)
dia. 60 grit medium grinding wheel
22
5/8" (16 mm) Face, 6" (152 mm)
dia. 36 grit coarse grinding wheel
1/2" (13 mm) Face, 6" (152 mm)
dia. 60 grit medium grinding wheel
5/8" (16 mm) Face, 6" (152 mm)
dia. cotton buffing wheel
24
1/2" (13 mm) arbor, 5/8" (16 mm)
DW758
Face, 6" (152 mm) dia.
DW758
7/8" (22 mm) & 1" (25 mm) Face,
8" (200 mm) dia. 60 grit medium
23
grinding wheel
27
7/8" (22 mm) & 1" (25 mm) Face,
8" (200 mm) dia. 36 grit coarse
grinding wheel
25 .
5/8" (16 mm) arbor, 8" dia. cotton
buffing wheel
27 and
5/8" (16 mm) arbor, 5/8"
(16 mm)–1–1/4" (32 mm) Face,
8" (200 mm) dia.
Repairs

Register Online
Thank you for your purchase. Register your product now for:
•
•
•
Register online at www.dewalt.com/register.
gRinDing WhEEls
BUFFing WhEEls
WiRE WhEEl BRUshEs
gRinDing WhEEls MAX. sAFE sPEED
BUFFing WhEEl
WiRE WhEEl BRUshEs
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a D
service center or a D WALT authorized service center.
e
Always use identical replacement parts.
WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
English
MAX. sAFE sPEED
4136 RPM
4136 RPM
4136 RPM
3825 RPM
3600 RPM
3600 RPM
3600 RPM
3600 RPM
3600 RPM
3600 RPM
WALT factory
e
7