Using Your Wireless Microphone - Dynex DX-M1113 Guide De L'utilisateur

DX-M1113.fm Page 7 Tuesday, September 19, 2006 7:07 AM

Using your wireless microphone

5 Plug the other end of the audio cable into the MIX IN or
AUX IN on an external amplifier.
6 Slide the power switch to the ON position. The POWER
indicator lights.
To install the transmitter battery:
1 Slide the battery compartment cover to open the battery
compartment.
2 Insert the 9 V battery into the battery compartment. Make
sure that the + and – symbols on the battery align with
the + and – symbols inside the battery compartment.
3 Slide the cover to close the compartment.
Using your wireless microphone
Note: You can use your wireless microphone within a range of
164 feet (50 meters) of the receiver. The ideal range is 82 feet
(25 meters).
To use your wireless microphone:
1 Turn on the receiver.
2 Plug the headset into the AF input jack on the transmitter.
3 Place the headset on your head.
4 Turn on the transmitter.
5 If you experience interference from nearby devices, use the
volume adjustment tool to adjust the volume.
7