Characteristics Of Construction; Maintenance; Replacement Of Batteries - Chauvin Arnoux C.A 760N Notice De Fonctionnement

The batteries can be replaced by rechargeable batteries, but
the life between charges will be much shorter.

3.5. CHARACTERISTICS OF CONSTRUCTION

Dimensions (LxWxH)
Weight
Cord
Protection class
Drop
3.6. COMPLIANCE WITH INTERNATIONAL
STANDARDS
Two-pole voltage detector per IEC 61243-3 ed. 2 of 2009.
3.7. ELECTROMAGNETIC COMPATIBILITY
Emissions and immunity in an industrial setting compliant
with IEC 61326-1.
Except for the batteries, the instrument contains
no parts that can be replaced by personnel who have not
been specially trained and accredited. Any unauthorized
repair or replacement of a part by an "equivalent" may
gravely impair safety.
4.1. CLEANING
Disconnect the instrument completely.
Use a soft cloth, dampened with soapy water. Rinse with a
damp cloth and dry rapidly with a dry cloth or forced air. Do
not use alcohol, solvents, or hydrocarbons.

4.2. REPLACEMENT OF BATTERIES

If, during the self-test, only half of the indicators light, you
must replace the batteries.
„ Disconnect anything connected to the device.
„ Using a screwdriver, unscrew the two captive screws of
the battery compartment cover located on the back of
the device.
„ Withdraw the spent batteries and replace them with two
163 x 64 x 40mm
approximately 210g
length 90cm
IP65 per IEC 60529
IK04 per IEC 50102
2 metres

4. MAINTENANCE

37