Safety Information - Samsung UBD-M7500 Mode D'emploi

Masquer les pouces Voir aussi pour UBD-M7500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
1

Safety Information

Warning
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Class II product : This symbol
indicates that it does not require
a safety connection to electrical
earth (ground).
AC voltage : This symbol
indicates that the rated voltage
marked with the symbol is AC
voltage.
DC voltage : This symbol
indicates that the rated voltage
marked with the symbol is DC
voltage.
Caution, Consult instructions for
use : This symbol instructs the
user to consult the user manual
for further safety related
information.
• The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from overheating,
these slots and openings must never be blocked or
covered.
- Do not place this apparatus in a confined space, such
as a bookcase, or built-in cabinet, unless proper
ventilation is provided.
- Do not place this apparatus near or over a radiator
or heat register, or where it is exposed to direct
sunlight.
- Do not place vessels (vases etc.) containing water
on this apparatus. A water spill can cause a fire or
electric shock.
This symbol indicates that high
voltage is present inside. It is
dangerous to make any kind of
contact with any internal part of this
product.
This symbol indicates that important
literature concerning operation and
maintenance has been included with
this product.
• Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorised
Samsung dealer or service centre immediately.
• This apparatus uses batteries. In your community,
there might be environmental regulations that
require you to dispose of these batteries properly.
Please contact your local authorities for disposal
or recycling information.
• Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can
result in fire or electric shock.
• Route power-supply cords so that they are not
likely to be walked on or pinched by items placed
on or against them. Pay particular attention to
cords at the plug end, at wall outlets, and the point
where they exit from the apparatus.
• To protect this apparatus from a lightning storm,
or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the set due to lightning and
power line surges.
• Before connecting the AC power cord to the DC
adaptor outlet, make sure the voltage designation
of the DC adaptor corresponds to the local
electrical supply.
• Never insert anything metallic into the open parts
of this apparatus. Doing so may create a danger of
electric shock.
• To avoid electric shock, never touch the inside of
this apparatus. Only a qualified technician should
open this apparatus.
2
English

Publicité

Table des Matières
loading

Table des Matières