Smart Wifi Remote Control (Optional); Testing Your Fan - Craftmade FRM52 Guide D'installation

13. Smart WiFi Remote Control (Optional)

To enjoy all the potential of your new
device, you will need to download the
Craftmade app, available on the Google Play
Store and Apple App Store, or use the QR code
to download the app if you have not already
done so.
Once you download the app, register new
account and password.
NOTE: Please keep this account information.
You will use this account when you connect with
your smart speaker.
When you log into the main page you will see
+
the ' ' on the right side of the top space. You
will see the add a new device screen, then
choose fan. Follow the configuration Wi-Fi
process to continue pairings.
After the paring process with Wi-Fi receiver, you
can control the fan speed and light functions on
the app. If you cannot find the fan, please see
"Help" section on the add a new device screen.

14. Testing Your Fan.

It is recommended that you test fan before finalizing
installation. Restore power from circuit box and light switch (if
applicable). Test wall control (optional installation) by locating
ON/OFF slider switch on wall control, then set to the ON
position. Test light and dimmer function and then test fan
speeds. Next, locate handheld remote control. Test the light
ON/OFF function by pressing the L button; test the dimmer
function by pressing the L button and holding it down for up to
5 seconds. Test fan speeds with the different fan speed buttons.
If the wall and/or handheld remote control operates all of the
functions of the fan, battery (batteries) has (have) been installed
correctly. If the wall and/or handheld remote control do (does)
not operate all of the fan/light functions, refer to
"Troubleshooting" section to solve any issues before contacting
Customer Service.
Turn fan completely off before moving the reverse switch
(located on top of motor housing). Set reverse switch to
recirculate air depending on the season:
- LEFT position in summer (diagram 1)
- RIGHT position in winter (diagram 2)
A ceiling fan will allow you to raise your thermostat setting in
summer and lower your thermostat setting in winter without
feeling a difference in your comfort.
Important: Reverse switch must be set either completely LEFT or
completely RIGHT for fan to function. If the reverse switch is set in
the middle position (diagram 3), fan will not operate.
NOTE: If the wall control/handheld remote control interferes
with other appliances, turn power off first and then go back to
the instructions in Section 11.
reverse
switch
diagram 1
page 12
or
diagram 2 diagram 3
motor
housing