Maintenance And Storage - Ribimex Ribitech PREM1600 Manuel D'instructions Et D'utilisation

5.2- Operation:
1. Connect product to power source (see characteristics on product)
2. Wear appropriate protective equipment
3. Prepare material for mixing
4. Tightly secure the mixing container
Do not use your own weight or body to hold the container.
5. Firmly hold mixer with both hands. Always maintain a balanced and secure position.
6. Place mixing blade in material. Do not make any sudden movement or pendulum movement
7. Press on the lock button then on the switch to start mixer.
You can adjust speed with the speed selector.
8. Once work is finished, stop mixer by releasing the switch.
Note: do not put down the mixer until the mixing blade comes to a complete stop.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that switch is set on the "OFF"
position and plug removed from socket outlet..
Reminder: Make sure to maintain the machine in good working condition, carry out regular maintenance of the
machine after each use and before storage .Any breach or default of adequate maintenance reduces the life of the
machine and increases the risk of breakdowns and accidents.
To preserve the security system throughout the life of the machine, it is important to perform maintenance and proper
cleaning, DO NOT use non-compliant replacement parts and do NOT dismantle yourself the machine or change the
security features.
6.1- Maintenance
a) Clean the plastic parts with a soft and clean cloth.
Do not use aggressive cleansing agents (solvents, abrasive cleansers) or an abrasive sponge or any
sharp objects.
- Do not use any caustic chemicals to clean the plastics parts.
- Never put or immerse the product in water or any liquid, and ensure that water does not penetrate
the tool.
Never splash with water or clean with high pressure hose!
b) Clean connection rod with a soft brush.
c) Clean ventilation holes with soft brush.
d) Clean mixing blade and shaft with water.
6.2- Storage
- Clean tool before storage.
- Keep product, user manual and accessories in the original packaging.
- It is recommended to store the product in a clean, dry location, protected from frost, and keep it
out of children's reach (e.g. lock it up).
- Do not store product in temperatures lower than 0ºC (32ºF)
- Do not place or store any object on top of the product.
6.3- Carbon Brush
The carbon brushes must be checked and maintained after 60h of operation.
To replace the carbon brushes proceed as follows :