Fuses; Removal Of The Fuses - Dometic SMP 301 Instructions D'installation

3.2

Fuses

It must be strictly ensured during the installa-
tion that the power taken off at the individual
fuses is maximum 75% of the rated value of
the respective fuse. Higher outputs can result
in overheating and damage due to the higher
current.
3.2.1

Removal of the fuses

The fuses are located under the bottom
cover.
Remove the cover (2) to replace the fuse.
For this, press the two tabs (3) in the
direction of the arrow and raise the cover.
2
Front view without cover
SMP301-M-DE-EN-FR-IT-NL-ES-01.pdf 19 SMP301-M-DE-EN-FR-IT-NL-ES-01.pdf 19
i
Manufacturer-specific functions are configured
with the positioning of the fuses. When
replacing a fuse, ensure that you insert the new
one in the same position. Modification of the
configuration can result in malfunctions.
CAUTION!
Modification of the configuration can
result in malfunctions!
3
Fig. 2
Fig. 3
7
Installation
22.02.2016 14:13:35 22.02.2016 14:13:35