Function Introduction - Teka NFT 370 E-INOX Notice D'utilisation

Function introduction

Control panel
A1 Switch on/off the fridge storage
compartment
A2 Menu key
A3 Temperature up
A4 Temperature down
A5 Confirmation key
A6 Power ON/OFF
B Super cooling icon
Initial powering on
When the refrigerator is powered on for the first time, icon G will light. The fridge storage temperature
will be displayed as "-" due to high temperature inside. The freezer storage temperature will be
displayed as"- -" due to high temperature. The buzzer will beep. Press key A5, the buzzer will be
silenced and icon G will remain lit. After the temperature decreases to certain level, icon G will turn off
and the displayed temperatures of the fridge storage compartment and the freezer storage
compartment will become the ex-factory settings "5" and "-18" respectively.The brightness of D,E, H
icon will decrease to half automatically when the refrigerator is not being operated.
Fridge storage temperature setup
Press key A2 until icon D flashes. Then, press key A3 or A4 to set the temperature. The refrigerating
storage temperature cycles from 2 to 8. After you have set it to the desired value, press key A5 to confirm.
Note: Flashing of icon D is accompanied by flashing of icon E
Freezer storage temperature setup
Press key A2 until icon H flashes. Then, press key A3 or A4 to set the temperature. The freezing storage
temperature cycles from -16 to -24. After you've set it to the desired value, press key A5 to confirm.
Note: Flashing of icon H is accompanied by flashing of icon F
C Holiday function icon
D Fridge storage temperature display
E Fridge compartment indicating icon
F Freezer compartment indicating icon
G Alarm icon
H Freezer storage temperature display
I Super freezing icon
10