Safety Warning - V-TAC SMART LIGHT Serie Mode D'emploi

Thank you for selec�ng and buying V-TAC SMART LED Ligh�ng. V-TAC will serve you the best.
Please read these instruc�ons carefully before star�ng the installa�on and keep this manual
handy for future reference. If you have any other query, please contact our dealer or local vendor
from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installa�on or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installa�on of the product.
The products are suitable for 10-12 Hours Daily opera�on. Usage of product for 24 Hours a day
would void the warranty. This product is warranted for manufacturing defects only.
1) Lamps are limited to indoor use and are not advisable for use in humid environment
2) Lamp is to be used in well ven�lated areas and normal installa�on.
3) Cau�on: This lamp is NOT to be used in a totally enclosed fixture which is not good for heat
emission. Please do not install the lamp in enclosed space as it will shield the wifi signal due to
which resul�ng in the poor func�oning of the product.
4) Lamps and lanterns cannot be installed on the surface of ordinary combus�ble materials.
Increase in temperature is normal for lamps.
5) Do not exert external force or throw on the lamp.
6) Lamps should be stored in cool/dry place. Always make sure the environment is clean before
installing the lamp.
7) Do not discard the lamps with regular trash. Lamps are made with electronic components and
should be properly disposed at designated loca�ons with unified treatment like tradi�onal
electronic equipment.
NOTE:
1. This device requires Wi-Fi Frequency 2.4Ghz
2. Indoor use only
3. Opera�ng frequency (maximum transmi�ed
power) 2400MHz -2483.5MHz (20dBm)
INSTALLATION
Step 1: Disconnect the power supply and
install the lamp.
Step 2: Turn the power ON to test the lamp.
Step 3: Enable WI-FI and bluetooth on your
phone device.
Step 4: Scan the given QR code, or download
"V-TAC Smart Light" from the App Store
(iOS) or the Google Play Store (Android).
INTRODUCTION & WARRANTY

SAFETY WARNING

This marking indicates that this
product should not be disposed
of with other household wastes.
For ANDROID
2
ENGLISH
For IOS