Baninni LIVING Mode D'emploi page 13

All manuals and user guides at all-guides.com
Kindly remind: there are different kinds of toy
trays are optional, follow the methods A,B,C to
assemble them respectively
A. Insert the multifunctional playboard into the
tray and fix with bolts.
B. Press the bolts up and turn the them 90
degrees.
C. 1. As the picture shown on Fig. 1, there are
4 snap-fit components (a, b) on both front and
rear toy tray.
2. As the arrow shown on fig 2 fix the rear toy
tray onto the upper tray, and then press down
the front toy tray to fix the toy tray,
make sure the snap-fit components are fixed
firmly on their position (see fig. 3).
Press down simultaneously on the snap-fit
components on the base of the toy section to
release the toy tray (see fig. 4)
fig. 4