Steering; Elevating The Platform; Travel With Work Platform Elevated - Upright MX15 Guide De L'opérateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

S
T E E R I N G
1. Turn the Lift/Drive Switch to
2. While engaging the Interlock Switch, push the Steering Switch to the RIGHT or LEFT to turn the wheels
in the desired direction. Observe the tires while maneuvering the machine to ensure proper direction.
NOTE: Steering is not self-centering. Wheels must be returned to the straight ahead position by operating the Steering
Switch.
E
L E V A T I N G T H E
1. Locate a firm, level surface.
2. Check clearances above, below, and to the sides of machine.
3. Turn the Lift/Drive Switch to
REVERSE
4. While engaging the Interlock Switch, push the Control Handle to
5. If the machine is not level the level sensor alarm will sound and the machine will not lift or drive. If the
FORWARD
level sensor alarm sounds the platform must be lowered and the machine moved to a firm, level
surface before attempting to elevate the platform.
NOTE: The Depression Mechanism supports will deploy automatically as the platform elevates and will retract after
the platform has been lowered completely and has been driven.
T
R A V E L W I T H
NOTE: The machine will travel at reduced speed when the platform is elevated.
1. Check that the route is clear of surface hazards such as holes, drop-offs, bumps, curbs, or debris.
2. Check that the route is level, and is capable of supporting the wheel loads.
3. Check clearances above, below, and to the sides of platform.
4. Turn the Lift/Drive Switch to
REVERSE
5. Engage the Interlock Switch and move the Control Handle to
tion. The speed of the machine will vary depending on how far from center the Control Handle is moved.
FORWARD
6. If the machine is not level the level sensor alarm will sound and the machine will not lift or drive. If the
level sensor alarm sounds the platform must be lowered and the machine moved to a firm, level
surface before attempting to elevate the platform.
113100-020 - MX15 / MX19 - Operation Manual
All manuals and user guides at all-guides.com
.
P
L A T F O R M
.
W
P
O R K
L A T F O R M
.
.
E
L E V A T E D
or
to travel in the desired direc-
Operation
Page 9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mx19

Table des Matières