Specifications LD-63
Transmission
Interface 1
Interface 2
Indicators
Data rates
Temperature range
Humidity
Dimension
Weight
Mounting
Power supply alternatives
LD-63
Model description
AC
Power supply
230V AC
+15/–10%
Frequency
48–62Hz
Fuse, F2
100mA S
5x20 mm
Littelfuse
Power consumption
20mA
Isolation
RMS
3 000V
* Synchronous protocols can be transmitted under certain circumstances.
See "selection of bits" page 10.
Description LD-63
The LD-63 is a line splitter designed for use in multi-drop fibre optic neworks. The LD-63
allows the conversion between RS-422/485, RS-232/V.24 and fibre optic. The LD-63 consists of
two F/O channels, each with its separate transmitter and receiver (TX1, TX2, RX1and RX2)
On the front of the unit there are seven LED's indicating the datatransmission on the channels.
The fibre optic interface is transparent which means that data received on RX1 is retransmit-
ted on TX2 and data received on RX2 on TX1. The LD-63 allows communication on both RS-
422/485 and RS-232/V.24 but data should never be transmitted to both RS-422/485 and RS-
232/V.24 at the same time as it will be oversampled and be impossible to read correctly.
The number of LD-63's that can be connected in series is limited. See chart on page 11.
8
All manuals and user guides at all-guides.com
*
Asynchronous
, full/half duplex or simplex
EIA RS-232/ITU-T V.24
9-position detachable screw-terminal
EIA RS-422/RS-485/ITU-T V.11
5-position detachable screw-terminal
4 ST-connectors, see table of power budget
Power, TD, RD, TX1, TX2, RX1, RX2
Up to 115,2 kbit/s (RS-232)
Up to 1.5 Mbit/s (RS-422/485)
5–50°C, ambient temperature
0–95% RH without condensation
55x100x128 mm (WxHxD)
0.6 kg AC / 0.3 kg DC
On 35 mm DIN-rail
LD-63
LD-63
115V AC
DC
115V AC
24V DC
+15/–10%
+50/–50%
48–62Hz
–
100mA S
1.6A S
5x20 mm
5x20 mm
Littelfuse
Littelfuse
40mA
3W
3 000V
1 500V
LD-63
LD-63
36–55V DC
HV
48V DC
95–240V AC±10%
+15/–25%
110–240V DC±10%
–
48–62Hz / –
1.6A S
1A T Wickmann
5x20 mm
Littelfuse
3W
40mA
1 500V
3 750V
6072-2004