Package Contents; Mounting The Camera - Eminent EM6050 Mode D'emploi

All manuals and user guides at all-guides.com
arm with wing nuts to determine the correct angle. Because of the apparently
recording LED and the cable the camera looks like a real security camera.Therefore,
assemble the camera at a place where it certainly will be spotted.

2.2 Package contents

The following parts need to be present in the packing:

EM6050 dummy camera

Mounting set, consisting of 1x mounting stand, 2x wing nuts, 2x clamp brackets

3x screws to mount the camera

3.0 Mounting the camera

The EM6050 is designed to keep unwanted people of your property. When the camera
is spotted, people will think twice before entering your property. Follow these steps to
mount the camera properly for use.
1. Take the camera, mounting stand and mounting set out of its package.
2. Use the mounting stand to draw three holes on the location where you want to
mount the camera.
3. Drill 3 holes and attach the camera stand with 3 screws to the ceiling or wall.
4. To get the red LED to work you will need to place batteries (2xAA) in the camera.
Slide the solar vizor to the back and open the battery compartment. Here you can
place the batteries. (Batteries are not included).
5. The LED light will be lit every 5 seconds.
6. Close the compartment and place the vizor back.
7. Mount the camera back on the stand.
8. Adjust the camera with the wing nuts so the camera will be aimed at the area you
want to 'observe'.
The 'power cable' can be placed in the wall or ceiling so the camera will look
9.
even more real.
10. The installation is now complete.
4.0 Frequently asked questions
V: There are no batteries supplied, is this correct?
A: This is correct. Batteries are not supplied with this product.
5.0 Service and support
This users manual has been carefully written by Eminent's technical experts.
If you have problems installing or using the product, please fill out the support form at
the website ww w.eminent-online.com/support.
6 | english