THORENS MM 002 Mode D'emploi page 5

Installation and Operation
3. Connect the power adaptor
Make sure the power switch is in the OFF (outwards)
position and the power adaptor is not connected to a
mains socket.
Connect the Thorens power supply cable to the power
socket on the rear panel.
After choosing and installing the correct snap-in mains
plug for your country, connect the power adaptor to a
live mains socket then press the power button on the
rear panel to the ON (inwards) position.
Always use the supplied mains power adaptor or an
original Thorens spare part!
If you prefer, the MM 002 can be left powered on
thanks to its very low power consumption levels. If
you plan to leave it unused for a prolonged period
of time, we suggest disconnecting the power adaptor
from the mains socket.
The MM 002 is now ready for use. Switch on or un-mute
your amplifier and enjoy your favourite music!
5