Electrical Connection - Koss KS5845-2 Guide D'utilisation

ELECTRICAL CONNECTION

A. Powering and installation
1. Powering the system indoors (Refer to Figure 1)
Plug one end of the AC to DC adapter into the
DC jack on the right side ofthe main unit, then
plug the other end into the 120V AC power
outlet.
2. Powering the system in a car (refer to Figure 1)
Plug one end of the cigarette lighter adapter
into the DC jack on the unit, thenplug the other
end into the cigarette lighter socket.
Note: Unplug the apparatus from the power
source when not in use foran extended period
of time.
B. Connecting to Other Equipment
1. AV Out
Connecting with a TV or another monitor (Refer
to Figure 2)
Connect the small end of the supplied video
cable into the unit's VIDEO OUPUT jack and
connect the other end to the VIDEO INPUT
jack on your TV or Monitor through an optional
RCA cable (Yellow = Video).
Connect the small end of the supplied audio
cable into the unit's AUDIO OUTPUT jack and
connect the other end to the AUDIO INPUT
jacks on your TV or MONITOR through an
optional RCA cable (white = left channel, red
= right channel).
2. AV In
Using "AV Jacks" connecting to a Game or
Camcorder.( Refer to Figure 3)
a. Slide the AV IN/DVD switch to AV IN
Connect the small end of the supplied video
cable into the unit's VIDEO INPUT jack and
connect the other end to the VIDEO OUTPUT
jack on your Game or Camcorder through an
optional RCA cable (Yellow = Video).
Connect the small end of the supplied audio
cable into the unit's AUDIO INPUT jack and
connect the other end to the AUDIO OUTPUT
jacks on your Game or Camcorder through an
optional RCA cable (white = left channel, red
= right channel).
NOTICE:
An LCD panel and/or video monitor may be
installed in a motor vehicle and visible to the
driver if the LCD panel or video monitor is used
for vehicle information, system control, rear or
side observation or navigation. If the LCD panel
or video monitor is used for television reception,
video or DVD play, the LCD panel or video
monitor must be installed so that these features
will only function when the vehicle is in 'park'
or when the vehicle 's parking brake is applied.
An LCD panel or video monitor used for
television reception, video or DVD play that
operates when the vehicle is in gear or when
the parking brake is not applied must be
installed to the rear of the driver 's seat where
it will not be visible, directly or indirectly, to
the operator of the motor vehicle.
Figure 2
8
Figure 3