Program 3; Retention Charge; Appliance Protection Function; Maintenance And Care - ULTIMATE SPEED ULGD 3.8 A1 Traduction Du Mode D'emploi D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Program 3

For charging 12 V batteries with a capacity of
between 14 Ah–120 Ah.
Press the program selection button
program 3. The symbol
LCD. During charging, the charge display
flashes and shows the progress of the charge
procedure (1–4 bars). When the battery is fully
GB
charged, the condition display
The flashing stops and the appliance automatically
switches to retention charge.
Program 4
For charging 12 V batteries with a capacity of
between 14 Ah–120 Ah under cold conditions or
for charging AGM batteries.
Press the program selection button
program 4.
NOTE
This program may start with a minute delay.
The symbol
During charging, the charge display
flashes and shows the progress of the charge
procedure (1–4 bars). When the battery is
fully charged, the condition display
4 bars. The flashing stops and the appliance
automatically switches to retention charge.

Retention charge

As described under programmes, this appliance
features the automatic retention charge. Depending
on the voltage drop of the battery, caused by
selfdischarge, the appliance reacts with different
charge currents.
The battery can remain connected to the charger
for longer periods of time.

Appliance protection function

The charger switches the electronics off and switches
the system instantly to the basic setting, as soon as
there is an abnormal situation, such as short circuit,
critical voltage drop during charging, broken circuit
or swapped connection of the connector clamps is
detected.
Should the appliance become too hot during charg-
ing, the output current is automatically reduced. This
protects the appliance from damage.
22
All manuals and user guides at all-guides.com
„12 V" (14,4 V / 3,8 A)
, to select
is displayed on the
shows 4 bars.
„12 V" (14,7 V / 3,8 A)
, to select
is displayed on the LCD.
shows

Maintenance and care

WARNING! Before you carry out any
work on the battery charger always
pull the mains plug out of the mains
socket.
The appliance is maintenance-free.
Do not under any circumstances use solvents or
other aggressive cleaning agents.
Clean the plastic surfaces of the device with a
dry cloth.

Warranty

The warranty for this appliance is for 3 years
from the date of purchase. The appliance has
been manufactured with care and meticulously
examined before delivery. Please retain your
receipt as proof of purchase. In the event of
a warranty claim, please make contact by
telephone with our Service Department. Only
in this way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
manufacturing defects, but not for transport dam-
age, for wearing parts or for damage to fragile
components, e.g. buttons or batteries. This product
is for private use only and is not intended for com-
mercial use. The warranty is void in the case of
abusive and improper handling, use of force and
internal tampering not carried out by our author-
ized service branch. Your statutory rights are not
restricted in any way by this warranty. The warranty
period will not be extended by repairs made under
warranty. This applies also to replaced and repaired
parts. Any damage and defects extant on purchase
must be reported immediately after unpacking the
appliance, at the latest, two days after the purchase
date. Repairs made after the expiration of the war-
ranty period are subject to payment.
ULGD 3.8 A1

Publicité

Table des Matières
loading

Table des Matières