Technical Specifications - Össur i-LIMB WRIST Mode D'emploi

TROUBLESHOOTING
Problem
Hand and wrist do not operate.
Hand does not operate
A single digit does not operate.
Wrist and hand are difficult to operate.
Battery does not last a full day.
Battery does not work.
How can I locate my device number using
the My i-Limb app?

TECHNICAL SPECIFICATIONS

i-Limb Wrist
Voltage
Maximum Current
Battery Capacity
Maximum axial wrist load limit (static limit)
NOTE: refer to the hand technical information for limits of the overall prosthesis.
Time for 90° rotation at maximum speed
Device weight
Device length
IP rating
Country of manufacture
Expected Service Life
Action
Make sure battery is fully charged.
Make sure battery is fully charged.
Check the electrodes have good contact with skin.
Ensure the hand is fully engaged at the wrist.
Run hand health check on the My i-Limb app.
Check inputs on My i-Limb app using practice bars.
Make sure the electrodes stay in good contact with skin.
Fully charge the battery overnight.
Inform your clinician.
Check if the battery is charged.
Inform your clinician.
Open the My i-Limb app. All available devices will be shown on
the home screen. If you have more than one prosthesis, make
sure only one prosthesis is turned on. The prosthesis turned on
will be shown on the connection screen. Alternatively, connect
your prosthesis to the My i-Limb app, go to "settings", and then
go to "about". The device number will be displayed in this menu.
Range 6 - 8.4 V
6 A
Rechargeable lithium polymer 7.4 V (nominal); 2,000 mAh
capacity; 1,300 mAh capacity
90 kg/ 198 lb.
1 second
160 g
56 mm
IP54 (IEC. 60529:2001)
Made in UK
5 years
9