Domo Piet Huysentruy DO301CT Mode D'emploi page 30

DO301CT
uSE
1. First place the batteries that are
packed seperately (see 'Replace
batteries').
2. Remove the silicone protection cap and
clean the probe and the thermometer
before the first use with a damp cloth.
3. Press the on/off button
thermometer.
4. With the °C/°F button you can switch between
Celsius and Fahrenheit.
5. Stick the point of the probe in the middle of the meat (in
the oven or in the frying pan) to measure the temperature.
The measurement is correct when the indication on the
LCD screen does not change anymore. This takes about 4
to max. 10 seconds.
6. The display of the thermometer has a display light. When
you turn on the thermometer this light will light up for
7 seconds. After these 7 seconds the light will go out
automatically. To make it light up again, you need to
press the on/off button or the °C/°F button twice.
7. To turn off the thermometer, press the on/off button
once. The appliance will shut down immediately.
All manuals and user guides at all-guides.com
to turn on the
30