PR electronics PROFIBUS PA Manuel Du Produit page 21

LERBAKKEN 10, 8410 RØNDE DENMARK.
Transmitter with Bus technology of Series 5350B manufactured by PR electronics A/S
via the test made by NEPSI (National Supervision and Inspection Center for Explosion
Protection and Safety of Instrumentation) have been proved that they are fulfilling the
General Requirements according to, GB 3836.1-2010, GB3836.4-2010, GB3836.20-2010.
The symbol of explosive protection are EX ia IIC T4~T6 or Ex ib(ia) IIC T4~T6 while the
Certificate No. is GYJ14.1101X.
Note for the use of transmitter:
1. The Symbol "X" applied after the Cert. No., indicates that this transmitter cannot be
applied in explosive environment of danger until the Protection Grade of the box where the
transmitter will later on be placed is not lower thant IP20 (GB4208), and has been approved
by the National Authorized Inspection Body. The metallic case must accord to item 8,
GB3836.1-2010; the nonmetallic case must accord to item 7.3, GB3836.1-2010.
2. The relationship of the explosive protection ingress, the temperature Code, ambient
temperature and max. output parameter is indicated as follows:
T4: -40°C~+85°C
T5 -40°C~+70°C
T6: -40°C~+60°C
Ui
Li 120mA
Pi 0.84W
Revision date:
2015-10-27
Ex ia IIC
-40°C~+75°C
-40°C~+65°C
-40°C~+45°C
30V 30V
300mA
1.3W
Ci= 2nF, Li=1µH
Version /Revision
V4/R0
WWW.PRELECTRONICS.COM
-40°C~+85°C
-40°C~+60°C
-40°C~+45°C
17.5V
250mA
2.0W
5350QFC01
V2R0
5350V114-FR
5350QE01
Ex ib(ia) II C
-40°C~+85°C
-40°C~+75°C
-40°C~+60°C
30V
250mA
5.32W
Page:
11/15
21