Technical Specifications - urmet domus 1092/302 Mode D'emploi

•
Consider that the distances may decrease if the devices are used with DVR apparatuses.
•
Consider the physical connection to be made with the utmost attention.Although the video balun
system allows to carry video signals on UTP cables generally used in IT systems, the balun system
will not be electrically compatible with the signals present online in any way. For this reason, the
utmost care is required when installing a video balun system using wires already installed in an IT
network.
USE
The 1092/302 device may only be used as a transmitter (TX).
The device allows to connect a video source using one pair of twisted wires in a dedicated UTP CAT5
cable.
It may be used in combination with the following receivers:
Ref.1092/303 → "1ch active receiver"
Ref.1092/304 → "4ch active receiver"
Ref.1092/316 → "16ch active receiver"
Important note:
•
The use of Urmet Domus Ref.1092/800-801 power supplies with 13.2 V output is recommended.

TECHNICAL SPECIFICATIONS

Video input/output:....................................................................................................................... Female BNC
UTP cable input/output: ...........................................................................................................Terminal board
Recommended wire type:.................................................................................24 AWG UTP CAT5 or higher
........................................................................... Impedance 100 Ω ± 20%, resistance DC loop 18 Ω/100 m
BNC impedance: .......................................................................................................................................75 Ω
UTP impedance:......................................................................................................................................100 Ω
Power: .................................................................................................................................... 12 VDC (± 10%)
Consumption: .................................................................................................................................max. 80mA
Reachable distance *:.......................................................................................................................... 3000* m
Voltage surge protection:............................................................................................................................ Yes
Working temperature range:............................................................................................................... -10-45°C
Storage temperature range: ............................................................................................................... -30-60°C
Humidity:................................................................................................................................................. 0-95%
Dimensions (W x H x D): ......................................................................................................... 70x28x105 mm
Weight (each): ......................................................................................................................................... 130 g
* This value may be reached if the following are used for system installation:
•
22 AWG UTP CAT6 cable or higher
•
black and white camera.
Important note:
Technical features may be subject to change without prior notice.
DS1092-017A
All manuals and user guides at all-guides.com
11