Tivoli Audio PAL+ BT Guide Rapide page 4

GETTING STARTED
FRONT
1. TUNING DIAL: Rotate the tuning knob to tune FM
or AM stations.
2. POWER INDICATOR: Power/Charging status LED.
3. SOURCE KNOB: Turn the Selector switch from
Off to FM or AM. To activate Bluetooth, switch to
BT and follow the steps outlined in the "Bluetooth
Operation" section.
4. VOLUME: Adjust the volume to the desired level.
BACK
1. FM ANTENNA: Adjust the antenna for best FM
reception. This antenna has no effect on AM recep-
tion. For AM, rotate the PAL BT itself to align the
internal antenna for best reception.
1
2. AC/DC INPUT: Connect the included external
power supply here. Use only the power supply
provided with this product. Should the power
3
supply get damaged or misplaced, use only a like
2
replacement. The connector is a 5.5mm/2.1mm
center positive connector.
4
3. HEADPHONE OUTPUT: Connect a set of head-
phones (not included) with a stereo 3.5mm jack here.
4. AUXILIARY INPUT: Connect an auxiliary device
(such as an MP3 player) here using a stereo 3.5mm
audio cable (not included). The AUX IN jack is
unavailable when a Bluetooth device is connected.
You must first disconnect any Bluetooth device to
use the wired AUX IN function.
5. BATTERY COMPARTMENT.
4 – ENGLISH
1
3
2
4
4
3
1
2
5