Self-Cleaning - White&Brown Surfer Plume Mode D'emploi

All manuals and user guides at all-guides.com
Notice DB 718/719 21/12/05
In order to remove lime and dust particles, the self-cleaning system should be used at least
once a month.
• Fill the water tank with fresh water.
• Set the variable steam button (5) to no steam position (0).
• Insert the mains plug into the wall socket.
• Set the temperature control knob (1) to the maximum temperature.
• Wait until the light indicator (2) goes off and steam iron has reached the preset
temperature.
• Remove the plug from the wall socket.
• Hold the steam iron horizontally over a sink.
• Turn the variable steam button (5) to max position. Hot water and steam will be emitted
from the soleplate. Swing the steam iron lightly to and fro to allow lime and dust particles
to come out.
• When the water tank is empty, release the self cleaning button.
• Stand the steam iron upright and insert the plug into the wall socket to let the steam iron
heat up again.
• Move the steam iron over a clean cotton cloth to clean the soleplate and let remaining
water on the plate evaporate.
Self-cleaning is sufficient for the usual service. It must be done at least once a month.
It is also convenient to clean the appliance as following.
• Unplug the mains from the wall socket and let the steam iron cool down.
• Scale and other residue can be wiped off with a damp cloth.
• From time to time, clean the inside of the water tank filling with water and shaking. Then
pour the water out.
• Unplug the mains from the wall socket.
• Pour any remaining water out of the water tank.
• Set the steam knob (5) to no steam position (0).
• Stand the iron upright and let it cool down sufficiently.
11:51 Page 14
SELF CLEANING
SELF CLEANING
CLEANING
CLEANING
STORAGE
STORAGE
14