Steam Ironing - White&Brown Surfer Plume Mode D'emploi

All manuals and user guides at all-guides.com
Notice DB 718/719 21/12/05
• Set the temperature control (1) to position II or III for moderate steam or maximum steam.
• If a too low temperature has been selected, water may leak from the soleplate.
• Ensure that there is enough water in the water tank.
• Stand the iron on its heel.
• Insert the mains plug into the wall socket.
• Wait for the thermostat light indicator goes off.
• Set the variable steam button (5) to adjust the steam :
« » Dry ironing (without steam)
I Light steam flow
II Middle steam flow
III Strong steam flow
IIII Maximum steam flow
• Ensure that there is enough water in the water tank.
• By pressing button (4) an intense jet of steam is emitted from the soleplate.
• To prevent water leaking from the soleplate, do not keep the steam control button
depressed for more than 5 seconds.
• Ensure that there is enough water in the water tank.
• The laundry can be damped down by pressing the spray button a couple of times (3), at any
temperature.
11:51 Page 12

STEAM IRONING

STEAM IRONING
SUPER STEAM
SUPER STEAM
SPRA SPRA Y SETTING Y SETTING
12