Technical Specifications; Replacement Parts And Wearing Parts - Beurer IH 50 Mode D'emploi

Problem/ Possible Cause/Remedy
Question
Which medi- Only the doctor can advise you
cines are suit- which medicine to use to treat your
able for inhala- condition. Consult your doctor.
tion? With the IH 50, you can atomise
medicines with a viscosity lower
than 3.
Some inhala- This is normal and occurs for techni-
tion solution cal reasons. Stop inhaling as soon
remains in the as you can hear a marked differ-
nebuliser. ence in the sound made by the at-
omiser, or when the device switches
off automatically due to insufficient
inhalant.
What should be 1. In babies, the mask should cover
taken into ac- the mouth and nose to guarantee
count when us- effective inhalation.
ing the device 2. In children, the mask should also
with infants and cover the mouth and nose. Nebu-
children? lisation next to a sleeping person
is not suitable because insufficient
medicine reaches the lungs.
Note: Children should only use the
device with help and under supervi-
sion of an adult. Never leave a child
alone with the nebuliser.
Inhalation with This is for technical reasons. Less
the mask takes medicine is inhaled per breath
longer. through the mask holes than us-
ing the mouthpiece. The aerosol is
mixed with ambient air through the
holes in the mask.
Does each user This is absolutely necessary for hy-
need their own giene reasons.
accessories?

9. Technical specifications

Dimensions
(LxWxH) 72 x 59 x 143 mm
Weight 238 g incl. batteries
Battery operation 4 x 1.5 V type AA, Mignon (LR6)
Volume max. 8 ml
Medicine flow approx. 0.25 ml/min.
Oscillation
frequency 100 kHz
Housing material ABS / TPE
Mains
connection 100 – 240 V~; 50 – 60 Hz; 0,15 A
Operating Temperature: +5 °C – +40 °C
conditions Relative humidity: <80 % non-con-
densing
Storage and Temperature: -10 °C – +45 °C
transport Relative humidity: <80 % non-con-
conditions densing
All manuals and user guides at all-guides.com
Subject to technical modifications.
Wearing parts are not covered by the guarantee.
The serial number is located on the device or in the
battery compartment.
All measurements were obtained with a sodium chlo-
ride solution using a laser diffraction method.
This diagram may not be applicable for suspensions or
highly viscous medicines. More information can be ob-
tained from the relevant medicine manufacturer.
10. Replacement parts and wear-
ing parts
Replacement parts and wearing parts are available
from the corresponding listed service address under
the stated material number.
Designation
Mesh atomiser with
medicine container
Yearpack
(Mouthpiece, Adult mask,
Child mask, Mesh atomiser,
Connecting piece)
Note
If the unit is used outside of the specifications, proper
function is no longer guaranteed! We reserve the right
to make technical changes to improve and further de-
velop the product.
This device and its accessories comply with European
standards EN60601-1 and EN60601-1-2, as well as
EN13544-1, and is subject to special safety measures
in terms of electromagnetic tolerance. Note that port-
able and mobile RF communication equipment can af-
fect this unit. More details can be requested from the
stated Customer Service address or found at the end
of the instructions for use. The unit conforms to the re-
quirements of the European Directive for Medical Prod-
ucts 93/42/EC, the MPG (German Medical units Act).
19
Material REF
PC 162.711
PP, 603.05
PVC, EVA,
PET