Greenlee 1818 Manuel D'instructions page 5

Instructions for Bending (cont'd)
5
Greenlee Tools, Inc.
5. Place the conduit in the bender as shown on the
shoe and align bending marks with the front edge of
the hook.
6. Lower the ratchet handle to the horizontal position,
then rotate the bend control handle to the BEND
position.
Note: Set the pointer on zero, with the conduit
snug against the shoe hook. The indicator does not
compensate for spring-back.
6
POINTER
7. Ratchet the bending shoe to the desired angle, as
shown by the degree angle pointer.
5
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
1818 Mechanical Bender