Strainer Installation; Mounting The Utility Sink - Conglom Transform QL087 Manuel De L'utilisateur

Installation (continued)

STRAINER INSTALLATION

1 . Apply a ring of sealant to the underside of the strainer
flange.
2 . Insert the strainer body into the sink .
3 . Assemble the rubber gasket, friction washer and locknut
onto the strainer body from under the sink .
4 . Hand tighten the locknut . Do not over tighten locknut as it
may split or deform the body of the strainer .

MOUNTING THE UTILITY SINK

1 . Carefully place a bead of sealant all around the top of the
cabinet .
2 . Ease the sink onto the cabinet, and ensure it is placed
evenly and centered on the cabinet . Wipe off any excess
sealant . Use masking tape to hold the unit in place until the
sealant dries .
7
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
Sealant
Basket
Strainer body
Rubber gasket
Friction washer
Locknut
CONGLOMKB .COM